Drive-Flex Aluminium Pilot Bore AT10 Timing Pulley with Flanges 10mm Pitch 27 Tooth for 50mm Wide Belts - Overall Width 66mm
New
Drive-Flex Aluminium Pilot Bore AT10 Timing Pulley with Flanges 10mm Pitch 27 Tooth for 50mm Wide Belts - Overall Width 66mm
New
Drive-Flex Aluminium Pilot Bore AT10 Timing Pulley with Flanges 10mm Pitch 27 Tooth for 50mm Wide Belts - Overall Width 66mm
New
Drive-Flex Aluminium Pilot Bore AT10 Timing Pulley with Flanges 10mm Pitch 27 Tooth for 50mm Wide Belts - Overall Width 66mm
Drive-Flex Aluminium Pilot Bore AT10 Timing Pulley with Flanges 10mm Pitch 27 Tooth for 50mm Wide Belts - Overall Width 66mm
Drive-Flex Aluminium Pilot Bore AT10 Timing Pulley with Flanges 10mm Pitch 27 Tooth for 50mm Wide Belts - Overall Width 66mm

SKU: PBM66AT10/27-2-DRIVEFLEX

Drive-Flex Aluminium Pilot Bore AT10 Timing Pulley with Flanges 10mm Pitch 27 Tooth for 50mm Wide Belts - Overall Width 66mm

CHF 74.00 ex VAT
CHF 74.00
ex VAT
In stock

Quantity Price Breaks

5+ CHF 73.26
10+ CHF 70.30
20+ CHF 68.82
50+ CHF 66.60
100+ CHF 65.12
500+ CHF 61.42
1000+ CHF 51.80
Return policy
90-Days Free Returns
Learn More
Low cost shipping
International Delivery
Learn More
Drive-Flex Aluminium Pilot Bore AT10 Timing Pulley with Flanges 10mm Pitch 27 Tooth for 50mm Wide Belts - Overall Width 66mm
Drive-Flex Aluminium Pilot Bore AT10 Timing Pulley with Flanges 10mm Pitch 27 Tooth for 50mm Wide Belts - Overall Width 66mm
Drive-Flex Aluminium Pilot Bore AT10 Timing Pulley with Flanges 10mm Pitch 27 Tooth for 50mm Wide Belts - Overall Width 66mm
SKU: PBM66AT10/27-2-DRIVEFLEX

Drive-Flex Aluminium Pilot Bore AT10 Timing Pulley with Flanges 10mm Pitch 27 Tooth for 50mm Wide Belts - Overall Width 66mm

CHF 74.00 ex VAT
CHF 74.00
ex VAT

Description

Metric Pitch Pilot Bore Timing Pulley: These premium quality pulleys are manufactured from aluminium 6082 to exacting standards. The pulley flanges (which this product is available with or without) are produced from S235JR steel and are pressed onto the aluminium pulley and act as guides should the belt wander. Used with T series timing belts, they are supplied pilot bored and can either be finished in a lathe or reamed to the required size. The efficiency of drives can be affected by the use of worn pulleys and belts. Periodic inspections for debris and belt damage are recommended, replacing where needed, in turn, optimal drive efficiency as well as increased uptime and reduced running costs for your equipment can be achieved.
Benefits: Available in a wide range of diameters and number of teeth along with standard widths, alternative materials are available by request such as Stainless Steel, Delrin, etc.
Note: Smaller pulleys may be centre drilled and not pilot bored.


Please note: These will be provided with a nominal bore, specific diameter measurement available on request.

Downloads

Reviews